Qualities of a good arena surface — 5 qualities by which to recognise it

Mateusz Gieryn – podcast Budujemy stajnię, odcinek 1: 5 cech dobrego podłoża
Mateusz Gieryn, 4Horses Consulting
Mateusz Gieryn
4Horses Consulting — advising clients on the design and equipping of equestrian centres since 2012. Hundreds of completed yards.
‘Budujemy stajnię’ (Building a Stable) podcast, episode 1: Qualities of a good surface

How do you recognise a good arena surface? There are many types of riding surface, but the qualities of a good one are always the same: uniformity, elasticity, grip, cushioning and moisture. In the first episode of the ‘Budujemy stajnię’ podcast I discuss each of them, and at the end I show how a competition surface differs from one for daily training and how to adjust it.

Qualities common to all surfaces

Surfaces differ in material, method of irrigation and the discipline they are intended for. There are surfaces based on quartz sand, synthetic surfaces, systems with different types of irrigation, arenas for dressage and for jumping. Regardless of that, there is a set of common qualities that determines whether a surface is of good or poor quality.

The principle applies to practically all disciplines. The exception is reining, which uses very specific surfaces — in many respects the opposite of what we aim for when building a conventional arena. For the other types of surface, the five qualities described below are the starting point for any assessment.

Uniformity — the surface the same across the whole area

In my view this is the most important quality of a good surface. A riding surface must be exactly the same across its whole area. It may be a little looser, a little deeper or a little firmer — as long as it is identical in every part of the arena, horse and rider will quickly adapt to it, even if something is not quite right.

The worst situation is an arena where good patches alternate with bad ones. On such a surface a horse easily loses its balance, and the rider has a problem with consistency — some jumps simply do not come off.

Panorama of an indoor arena with a finished, level riding layer
A good surface is the same in every part of the arena.

Elasticity — neither too hard nor too deep

The surface faces a difficult task. On the one hand it must not be too hard, because that risks micro-injuries to tendons and joints. When a horse lands with its full body weight, it must not meet a compacted, concrete-like surface — the hoof has to slide forward a fraction and the hoof capsule expand slightly in order to absorb the impact well.

On the other hand the surface must not be too deep and too soft. When the hoof sinks in too far, the risk of injury rises again. The horse’s locomotor system is superbly adapted for running, but it is not a perfect machine and is fairly prone to injury.

The right elasticity of a surface is being studied ever more closely by the FEI, which is carrying out intensive tests in this area. Even so, nothing replaces experience and familiarity with a particular arena — it is we, the users, who feel best whether a surface suits us. The whole art lies in a healthy balance between a surface that is too hard and one that is too deep. You can read more about what happens to the hoof in contact with the surface in the article How the surface affects the horse’s movement.

Grip — the hoof must not slip

Another very important quality is grip. The surface must not cause the hoof to slide away. If the surface ‘lets go’ of the hoof, the horse will slip, and that is a very dangerous situation which can end in a fall.

Sometimes sand alone is not enough. Grip can be improved in several ways, including by using perforated mats. In our system of a quartz sand surface on mats, the riding layer consists of quartz sand with geotextile fibre laid on perforated mats, which separate it from the sub-base. We built an arena of this kind at, among others, Clarena Sports Club near Wrocław.

Perforated mats laid in a timber-framed arena before the surface is spread
Perforated mats beneath the riding layer improve the grip and stability of the surface.

Cushioning — the surface absorbs the energy of landing

Cushioning is, in short, the ability of the surface to absorb energy. Imagine a horse jumping a 140 cm fence. It weighs 400–500 kg itself, plus the saddle and rider — and it lands on one leg. These are very large loads.

That is why every way of taking the energy out of the jump matters. A good surface copes with this task and spares the horse’s tendons and joints, because it takes part of that energy upon itself.

Arena with a quartz sand surface and jumps set up in an indoor arena
On landing after a jump the surface has to absorb part of the energy.

Moisture — 8–17% water in the surface

The fifth quality, crucial for every sand surface, is moisture. About 90% of riding surfaces are sand-based, and sand always has to be moist. The exception is synthetic surfaces — for example the EquiTex textile surface, which needs no watering.

Moisture is also important because it regulates the other qualities. If a surface is too hard, that often means it is too wet. If it is too deep — it is usually short of water.

The correct amount of water in a sand surface is between 8 and 17%.

The work of the surface’s user consists largely of maintaining that moisture. This makes it possible to control all the preceding qualities.

These five qualities are universal. Whatever type of surface you choose, they are what we look at as consultants when we assess an existing surface or advise on how to build a new one. I will talk about the types of surface themselves in one of the next episodes — you will also find a comparison of systems on the Arena surfaces page.

A competition surface versus daily training

After competing, we would often like to have the same surface at home as at the show. That is not always a good idea. At competitions the surface can be very firm — a firm surface lets the horse push off harder and clear a higher fence, and gives more stability on landing. This applies particularly to show jumping.

A firmer surface is, however, potentially more injurious, especially as regards micro-damage. That is why, for daily training at your own yard, a surface somewhat softer and more elastic than the one you see at competitions is recommended. Admittedly, the power of the jump may be some 5% lower, but such a surface protects the horse’s tendons and joints better — and that is an investment in its health and safety.

How to adjust the surface: water and the leveller

On a good-quality surface you can decide for yourself whether it is to be firmer or more elastic. Two tools serve this purpose:

  • the amount of water — the more water in the surface, the firmer it is,
  • the setting of the leveller — the more you loosen the surface, the softer it will be.

That is why a good surface is also one that is easy to maintain and easy to control in order to achieve the intended result. A suitably chosen arena leveller helps with this.

Leveller tracks on a freshly levelled quartz sand surface
With the setting of the leveller you regulate how loosened — and therefore how soft — the surface is.

A high-quality riding surface is a little like a running track for an athlete. It is a refined, specialised system which on the one hand protects the health of horses — which are, after all, largely athletes — and on the other helps them achieve good results.

In conclusion

The five qualities — uniformity, elasticity, grip, cushioning and moisture — are a checklist worth bringing to every surface, new or existing. If you are planning a new arena or a modernisation, you can work out a preliminary quote in a few minutes: Get a surface quote online. About a specific project, get in touch with us, and you will find examples of facilities in our projects.

Do you have a question or your own experience with a surface? Write in the comments under the episode on YouTube — I will be glad to reply and return to the subject in the next episode.

We advise, design and supply stable equipment. Since 2012.


This article is based on episode 1 of the ‘Budujemy stajnię’ podcast (YouTube, in Polish). Audio version: listen to episode 1 on Spotify (the whole podcast: ‘Budujemy stajnię’ on Spotify).

Qualities of a good arena surface — 5 qualities by which to recognise it
Scroll to top